Ford 2002 Bantam - Brake Caliper (12 243 0)

206-03-7 Front Disc Brake 206-03-7
REMOVAL AND INSTALLATION
E9415 EN 03/2001 2002 Bantam
Brake Caliper (12 243 0)
General Equipment
Brake hose clamp
Removal
CAUTION: If brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold wa-
ter.
1. Remove the wheel and tyre. For additional
information, refer to Section 204-03.
2. Loosen the flexible hose brake union.
1. Using a suitable brake hose clamp,
clamp the brake hose.
2. Loosen the brake hose union.
3. Remove the brake caliper and anchor plate
assembly.