206-03-8 Front Disc Brake 206-03-8
REMOVAL AND INSTALLATION (CONTINUED)
E9415 EN 03/2001 2002 Bantam
4.
CAUTION: Cap the brake hose to
prevent fluid loss or dirt ingress.
Detach the brake caliper and anchor plate
assembly from the flexible brake hose.
• Turn the caliper and anchor plate
assembly counter clockwise to remove.
Installation
1. To install, reverse the removal procedure.
2. Bleed the brake system. For additional
information, refer to Section 206-00.
To Next Page
Loading...
