303-03-151 Engine Cooling 303-03-151
REMOVAL AND INSTALLATION
E6441 EN 07/2001 2002 Bantam
Water Pump — Vehicles with Diesel Engine (24 404 0)
Removal
1. Disconnect the battery ground cable. For
additional information, refer to Section 414-
01.
2. Drain the cooling system. For additional
inf
ormation, refer to Cooling System
Draining, Filling and Bleeding in this section
3. Remove the timing belt. For additional
information
, refer to Section 303-01A. For
additional information, refer to Section 303-
01B.
4. Remove the timing belt tensioner.
• Collect the tensioner spring.
5. Accurately mark the position of the engine
support insulator and remove the insulator.
To Next Page
Loading...
