303-03-152 Engine Cooling 303-03-152
REMOVAL AND INSTALLATION (CONTINUED)
E6441 EN 07/2001 2002 Bantam
6. Detach the engine front mounting bracket.
1. Completely remove the three bolts.
2. Fully loosen the remaining bolt.
7. Raise the engine using a suitable jack and
packing material, to allow the bolt to be
withdrawn through the body bracket.
8. Remove the engine front mounting bracket
and bolts (bracket shown removed for
clarity).
• The lower bolt hole is slotted to allow the
bracket to be removed.
9. Remove the idler pulley.
To Next Page
Loading...
