211-02-38 Power Steering 211-02-38
REMOVAL AND INSTALLATION
Power Steering Pump — Vehicles with 1.6L Engine (13 434 0)
Special Tool(s)
Expander, Teflon Seal
211-188 (13-015)
Remover, Power Steering
Pump, Pulley
211-199 (13-022)
Special Tool(s)
Installer Camshaft Pulley
303-458 (21-192)
Removal
1. Remove the auxiliary drive belt. For
additional information, refer to Section 303-
05.
2. NOTE: When installing a new power steering
pump, remove the power steering pump drive
pulley.
Using the special tool, remove the power
steering pump drive pulley.
3. Remove the low-pressure line.
• Allow the fluid to drain into a suitable
container.
E6614 EN 2002 Bantam
To Next Page
Loading...
