211-02-37 Power Steering 211-02-37
REMOVAL AND INSTALLATION (CONTINUED)
5. Raise and support the vehicle. For
additional i
nformation, refer to Section 100-
02.
6. Attach the accessory drive belt to the power
steering pump pulley.
• Rotate the accessory drive belt tensioner
clockwise.
7. Connect the power steering fluid cooler
lines to the power steering fluid cooler.
8. Lower the vehicle.
9. Fill and bleed the power steering system.
For additio
nal information,
refer to Section
211-02.
E6613 EN 2002 Bantam
To Next Page
Loading...
