303-06-213 Starting System 303-06-213
REMOVAL AND INSTALLATION
E5909 EN 07/2001 2002 Bantam
Starter Motor — Vehicles with 1.6L / 1.3L Engine (26 204 0)
Removal
1. Disconnect the battery ground cable. For
a
dditional information, refer to Section 414-
01.
2. Remove the engine undershield. For
a
dditional information, refer to Section 502-
00.
3. Disconnect the electrical connector from the
starter motor.
4. Remove the starter motor.
Installation
1. To install, reverse the removal procedure.
To Next Page
Loading...
