Ford 2002 Bantam - Page 850

303-06-212 Starting System 303-06-212
DIAGNOSIS AND TESTING (CONTINUED)
E1017 EN 07/2001 2002 Bantam
PINPOINT TEST C: UNUSUAL STARTER MOTOR NOISE
CONDITIONS DETAILS/RESULTS/ACTIONS
C1: CHECK THE STARTER MOUNTING
1 Check the starter and mounting brackets for
correct alignment.
• Is the starter mounted correctly?
 Yes
GO TO
C2
 No
INSTALL the starter motor.
Refer to the
procedure in this section.
TEST the system
for normal operation.
C2: CHECK THE STARTER DRIVE
1
Remove the starter motor.
Refer to the proce
dure in this section.
2
Inspect the ring gear for damage and wear.
• Is the ring gear damaged?
 Yes
REPAIR ring gear as required. TEST the
system for normal operation.
 No
INSTALL a new starter motor. TEST the
system for normal operation.