Ford 2002 Bantam - Exterior Door Handle (41 333 0)

501-14-10 Handles, Locks, Latches and Entry Systems 501-14-10
REMOVAL AND INSTALLATION
E5848 EN 08/2001 2002 Bantam
Exterior Door Handle (41 333 0)
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel. For additional
information,
refer to Section 501-05.
3.
CAUTION: Do not touch watershield
adhesive surfaces, as re-bonding will
be impaired.
Locally detach the watershield.
• Using a plastic knife, (disposable cutlery)
cut through the butyl strip to enable the
protective sheet to be peeled back for
access. Do not attempt to peel the sheet
from the door without cutting the butyl.
4. Detach the window guide runner and lock
shield (two screws).
5. Remove the window guide runner.