Ford 2002 Bantam - One Turn Signal;Hazard Lamp Is Inoperative

417-01-40 Exterior Lighting 417-01-40
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
4 Check if the right-hand turn signal lamps are
on continuously.
• Are the right-hand turn signal lamps on
continuously?
 Yes
REPAIR the short to power; circuit(s)
connected with splice S35, by using the
wiring diagrams. TEST the system for
normal operation.
 No
CHECK the instrument cluster. If necessary
INSTALL a new one. TEST the system for
normal operation.
PINPOINT TEST L: ONE TURN SIGNAL/HAZARD LAMP IS INOPERATIVE
CONDITIONS DETAILS/RESULTS/ACTIONS
L1: DETERMINE THE INOPERATIVE TURN SIGNAL LAMP
1.
2 Turn the multifunction switch to the LEFT-
HAND TURN SIGNAL position.
3 Determine the inoperative left-hand turn signal
lamp.
• Is the front turn signal lamp, left-hand side
inoperative?
 Yes
GO TO L2
 No
GO TO L4
L2: CHECK THE POWER SUPPLY OF FRONT LEFT-HAND TURN SIGNAL LAMP
1.
Headlamp, left-
hand side C45
2 Turn the multifunction switch to the LEFT-
HAND TURN SIGNAL position.
E9426 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL