205-04-6 Front Drive Halfshafts 205-04-6
REMOVAL AND INSTALLATION
E6319 EN 07/2001 2002 Bantam
Halfshaft LH (14 320 0)
Special Tool(s)
Installer, drive halfshaft
204-161 (14-041)
Remover, drive halfshaft
308-256 (16-089)
General Equipment
Two legged puller
Material
Specification
Transmission fluid -
manual transmission
SAE 75W90
Removal
1. NOTE: Stop the piston rod from turning using
an Allen key.
Undo the suspension strut top nut by five
turns.
2. Loosen the axle stub nut.
3. Detach the front wheel. For additional
information, refer to Section 204-03.
To Next Page
Loading...
