417-01-4 Exterior Lighting 417-01-4
DESCRIPTION AND OPERATION (CONTINUED)
Reversing lamps
The reversing lamp system consists of:
• Reversing lamp bulb,
• Reversing lamp switch,
• Wiring harness,
• Fuse F13.
The reversing lamp switch supplies the reversing
lamps with voltage. This circuit is fused through
fuse F13 in the CJB.
Stop lamps
• The stop lamps are integrated in the rear
lamp assemblies.
• The stop lamp switch supplies the stop lamps
with voltage.
Turn signal and hazard warning lamps
The turn signal and hazard warning lamp system
consists of:
• Turn signal switch (included in the
multifunction switch on the steering column),
• Turn signal relay,
• Turn signal lamps,
• Turn signal and hazard warning lamp
indicator in the instrument cluster,
• Wiring harness,
• Fuses F5 and F17.
The turn signal relay is supplied with voltage
through fuse F17 in the CJB and the turn signal
lamp switch.
Hazard warning lamp switch
• The hazard warning lamp switch is
incorporated in the multifunction switch on the
steering column. It is located on top of the
steering column shroud.
• When the hazard warning lamp switch is
switched on all four turn signal lamps and the
hazard warning lamp indicator in the
instrument cluster are supplied with a voltage
through fuse F5 in the CJB and the turn
signal relay.
Turn signal relay
The turn signal relay operates electronically and
is plugged into the multifunction switch.
Fuses and Relays
Battery junction box (BJB)
E6750 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
To Next Page
Loading...
