Ford 2002 Bantam - Halfshaft RH (14 321 0)

205-04-10 Front Drive Halfshafts 205-04-10
REMOVAL AND INSTALLATION
E6365 EN 07/2001 2002 Bantam
Halfshaft RH (14 321 0)
Special Tool(s)
Installer, drive halfshaft
204-161 (14-041)
Boot clamp tightening tool
204-169 (14-044)
General Equipment
Two-legged puller
Allen key
Removal
1. NOTE: Use an Allen key to stop the piston
rod from turning.
Undo the suspension strut top nut by five
turns.
2. Loosen the axle stub nut.
3. Detach the front wheel. For additional
information, refer to Section 204-03.