308-00- 8B Manual Transaxle and Clutch — General Information 308-00- 8B
E6760 EN 07/2001 2002 Bantam
Pinpoint Tests
PINPOINT TEST A: CLUTCH SLIPPAGE
CONDITIONS
DETAILS/RESULTS/ACTIONS
A1: CHECK FOR CLUTCH SLIPPAGE
1 Check the road wheels and apply the parking
brake.
2.
3 Start the engine and engage fourth gear.
4 Run the engine at approximately 2000 rpm.
5 Release the clutch pedal slowly.
• Does the engine stall when the clutch pedal is
fully released?
Yes
Clutch OK.
No
GO TO A2
A2: CHECK THE CLUTCH PEDAL FREE TRAVEL
1 Depress the clutch pedal manually to the point
of resistance and release.
2 Measure the pedal travel.
• Is the measured dimension within 10 mm?
Yes
GO TO A3
No
GO TO B3
A3: CLUTCH PEDAL OPERATION
1 Check the lubrication.
• Is the clutch pedal shaft sufficiently lubricated?
Yes
GO TO B3
No
Lubricate the clutch pedal shaft.
To Next Page
Loading...
