Ford 2002 Bantam - Page 897

Pinpoint Tests
PINPOINT TEST A: CLUTCH SLIPPAGE
A
1: CHECK FOR CLUTCH SLIPPAGE................................................................ 308-00-8B
A
2: CHECK THE CLUTCH PEDAL FREE TRAVEL ............................................. 308-00-8B
A3: CLUTCH PEDAL OPERATION...................................................................... 308-00-8B
PINPOINT TEST B: CLUTCH CHATTER OR SHUDDER
B1:
CHECK FOR CLUTCH CHATTER OR SHUDDER ........................................ 308-00-9
B2: CHECK THE ENGINE/TRANSAXLE ISOLATOR, ROLL RESISTOR............. 308-00-9
B3:
CHECK THE CLUTCH PRESSURE PLATE .................................................. 308-00-9
B4: CHECK THE CLUTCH DISC ......................................................................... 308-00-9
PINPOINT TEST C: CLUTCH DRAG
C1: CHECK THE BRAKE FLUID LEVEL.............................................................. 308-00-10
C2: CHECK THE CLUTCH PEDAL FREE TRAVEL............................................. 308-00-10
C3: CHECK THE BELLEVILLE SPRING WASHER OF THE
CLUTCH PRESSURE PLATE.............................................................................. 308-00-10
PINPOINT TEST D: CLUTCH PEDAL PULSATION
D1: CHECK THE CLUTCH PEDAL...................................................................... 308-00-10
PINPOINT TEST E: CLUTCH RELATED VIBRATIONS
E1: CHECK FOR ENGINE COMPONENT GROUNDING .................................... 308-00-11
E2: CHECK FOR ACCESSORY DRIVE VIBRATIONS ........................................ 308-00-11
E3: CHECK FOR RELEASE BEARING NOISE ................................................... 308-00-11
E4: INSPECT THE FLYWHEEL........................................................................... 308-00-11/12
PINPOINT TEST F: HARD SHIFTING
F1: CHECK THE FLUID LEVEL........................................................................... 308-00-12
F2: CHECK THE CLUTCH PEDAL FREE PLAY.................................................. 308-00-12
PINPOINT TEST G: EXCESSIVE NOISE
G1: CHECK THE TRANSAXLE NEUTRAL POSITION ........................................ 308-00-13
G2: TEST THE CLUTCH PEDAL FREE TRAVEL................................................ 308-00-13
G3: CHECK THE CLUTCH SLAVE CYLINDER WITH RELEASE BEARING ....... 308-00-13
G4: CHECK THE CLUTCH FRICTION DISK TORSION SPRINGS...................... 308-00-14
PINPOINT TEST H: FLUID LEAKAGE
H1: CHECK THE CLUTCH MASTER CYLINDER ................................................ 308-00-14
H2: CHECK THE CLUTCH SLAVE CYLINDER.................................................... 308-00-14
H3: CHECK THE SYSTEM HYDRAULIC TUBES ................................................ 308-00-14