412-00-51 Climate Control System — General Information 412-00-51
GENERAL PROCEDURES
Refrigerant Oil Addition (34 621 1)
1. NOTE: If more than one air conditioning
system component is being renewed, the oil
quantity to be added is the sum of each
individual quantity. For additional
information,
refer to General Specifications in this section.
NOTE: Always keep refrigerant oil in a closed
and sealed container to prevent entry of
moisture.
Top up with the calculated quantity of new
refrigerant oil.
2. NOTE: Only remove the protective caps just
before fitting, in order to prevent entry of
moisture and dirt.
When repairs are complete, evacuate the
air conditioning system, fill with R134a and
check operation. For additional
information, refer to Air Conditioning -
Drain, Evacuate and Re-fill in this section
E3649 EN 07/2001 2002 Bantam
To Next Page
Loading...
