412-00-55 Climate Control System — General Information 412-00-55
SPECIFICATIONS
General Specifications
Specification
A/C Refrigerant R134a, YN-11 WSH-M17B19-A
PAG A/C Refrigerant Oil, F2AZ-19577-AC (MC YN-12b) WSH-M1C231-B
A/C Clutch Air Gap 0.35 mm-0.75 mm
Ford A/C Flushing Solvent, F4AZ-19579-A -
Fluoro-Lite / P Florescent Tracer Dye, 164-R 3712 -
Addition of Air Conditioning Refrigerant Oil
When Installing a New: Specification
Air conditioning condenser Add 30 ml.
Air conditioning evaporator Add 90 ml.
Suction accumulator Fill with the same quantity + 90 ml.
Air conditioning compressor, if the quantity of oil
taken from the compressor is less than 90 ml.
Add 90 ml.
Air conditioning compressor, if the quantity of oil
taken from the compressor is between 90 ml and
150 ml.
Fill with the same quantity + 30 ml.
Air conditioning compressor, if the quantity of oil
taken from the compressor is greater than 150 ml.
Add 150 ml.
Air conditioning lines, if air conditioning has been
switched on with defective line.
Add 60 ml.
Per evacuation process Add 30 ml.
Air conditioning compressor
Description Type
Air conditioning compressor FS-10
Fixed orifice tube
Description Color
Fixed orifice tube Orange
Torque Specifications
Description
Nm
Drive plate to compressor bolt 13
Air conditioning compressor retaining bolts 25
Manifold and tube to A/C compressor retaining bolt 20
Suction accumulator bracket retaining bolts 6
Pressure cutoff switch 10
E6732 EN 07/2001 2002 Bantam
To Next Page
Loading...
