303-07-221 Engine Ignition 303-07-221
REMOVAL AND INSTALLATION
E6681 EN 07/2001 2002 Bantam
Ignition Coil Pack — Vehicles with 1.6L / 1.3L Engine (22 414 0)
Removal
1. Disconnect the spark plug wires from the
ignition coil pack.
2. Disconnect the ignition coil pack electrical
connector.
3. Remove the ignition coil pack.
Installation
CAUTION: The ignition coil pack and
spark plug wires are numbered. Make
sure the spark plug wires are correctly
installed to the ignition coil pack. Fail-
ure to follow this instruction may result
in damage to the engine.
To Next Page
Loading...
