303-07-220 Engine Ignition 303-07-220
DIAGNOSIS AND TESTING
E1021 EN 07/2001 2002 Bantam
Engine Ignition
General Equipment
WDS
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of damage.
Refer to the following chart:
Visual Inspection Chart
Mechanical
Electrical
• Damaged spark plug
wires.
• Damaged spark
plugs.
• Connections to spark
plugs and coil.
• Loose or corroded
ignition coil electrical
connector.
• Damaged wiring har-
ness(s).
3. If visual inspection reveals an obvious cause,
rectify this before continuing.
4. If the concern remains after visual inspection,
use WDS to diagnose the system.
To Next Page
Loading...
