Ford 2002 Bantam - Front Seat Backrest

501-10-8 Seating 501-10-8
REMOVAL AND INSTALLATION
Front Seat Backrest
Removal
All vehicles
1. Remove the front seat. For additional
information,
refer to Front Seat in this
section.
2. Remove the seat outer trim panel.
1. Detach the front retaining clip.
2. Detach the rear locating tang.
3. Remove the backrest recliner hand wheel.
• Remove the cover.
Vehicles without driver airbag
4. Remove the safety belt buckle.
E9366 EN 07/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED
BACK TO CHAPTER INDEX