204-02-15 Rear Suspension 204-02-15
REMOVAL AND INSTALLATION
E1072 EN 06/2001 2002 Bantam
Shock Absorber - Rear (15 783 4)
Removal
1.Jack up the rear of the vehicle, fit stands
under the body and chock the front wheels.
For additional information,
refer to Section 100-02
NOTE: It is essential that the vehicle does not
exceed the maximum kerb weight if it is to be
raised and supported on the axle tube.
2. Remove the nut and bolt securing the
shock absorber to its lower mounting.
3. Remove the two bolts securing the shock
absober top mounting bracket to the body.
Installation
1. Install the new shock absorbers in reverse
order.
To Next Page
Loading...
