501-05-2 Interior Trim and Ornamentation 501-05-2
DESCRIPTION AND OPERATION
07/2001 2002 Bantam
Interior Trim
This section covers removal and installation of
the interior mouldings and trim panels. In most
instances, one component overlaps another
component. If this condition is found, it will be
necessary to loosen or remove the overlapping
component before removal of the desired
component.
The headliner is a one-piece design covering the
entire interior roof and is made of a moulded
composite with a cloth covering.
The vehicle is carpeted throughout.
To Next Page
Loading...
