211-02-46 Power Steering 211-02-46
REMOVAL AND INSTALLATION
Power Steering Gear (13 116 0)
Special Tool(s)
Separator, ball joint
13-006
Expander, Teflon seal
13-015
Special Tool(s)
Guide pins, subframe
15-097A
Removal
1. Disconnect the battery ground cable.
2. From inside the passenger compartment,
remove the flexible coupling to pinion shaft
pinch bolt.
3. From inside the passenger compartment,
slacken the flexible coupling to column
shaft pinch bolt.
4. Slacken the wheel nuts, raise the vehicle
and remove the front road wheels.
E6320 EN 07/2001 2002 Bantam
To Next Page
Loading...
