310-01A-28 Fuel Tank and Lines — Petrol Engines 310-01A-28
REMOVAL AND INSTALLATION
E6464 EN 09/2001 2002 Bantam
Fuel Return Line (23 594 0)
General Equipment
Fuel tank draining equipment
WARNING: This procedure involves fuel
handling. Be prepared for fuel spillage at
all times and always observe fuel handling
precautions. Failure to follow these in-
structions can result in personal injury.
NOTE:
It will be necessary to raise the vehicle in
order to carry out this procedure.
Removal
1. Disconnect the battery ground cable.
2. Drain the fuel tank using proprietary fuel
tank draining equipment.
3. Remove the flexible coupling to pinion shaft
pinch bolt.
4. Loosen the flexible coupling to column shaft
pinch bolt.
5. Loosen the wheel nuts, raise the vehicle
and remove the front road wheels.
To Next Page
Loading...
