Ford 2002 Bantam - Clutch Disc and Pressure Plate

308-01-28 Clutch 308-01-28
REMOVAL AND INSTALLATION
E5939 EN 07/2001 2002 Bantam
Clutch Disc and Pressure Plate
Special Tool(s)
Aligner, clutch disc
308-206 (16-067)
Removal
1. Detach the transmission. For additional
information,
refer to Section 308-03.
2. Detach the clutch from the flywheel.
1. Unscrew the bolts (6x).
2. Lift the clutch off the locating dowels and
put it down with the clutch disc.
Installation
1. Center the clutch disc on the pressure
plate.