Ford 2002 Bantam - Front Wheel Alignment (at Kerb Weight) - Caster and Camber; Front Wheel Alignment (at Kerb Weight) - Total Toe Setting; Torque Specifications

204-01-26 Front Suspension 204-01-26
SPECIFICATIONS
E1062 EN 06/2001 2002 Bantam
Front Wheel Alignment (at kerb weight) - Caster and Camber
Derivative Derivative Caster Caster Camber Camber
Model Steering Nominal Tolerance
Range
Nominal Tolerance Range
1.3L Standard Manual 1° 34' 2° 47' - 0° 17' - 0° 40' 0° 44' to -2° 04'
All Other Power 2° 14' 3° 29' - 0° 59' - 0° 37' 0° 47' to - 2° 01'
Maximum variation - left to right-hand side - camber 1° 00' Caster 1° 15'
Front Wheel Alignment (at kerb weight) - Total Toe Setting
Derivative Tolerance Range Setting Adjustment, if required
All - 0° 12' to 0° 12'
Torque Specifications
Description
Nm
Tie-rod locknut 63
Front hub retaining nut 290
Rear hub retaining nut 235