Ford 2002 Bantam - The Flash-To-Pass Feature Is Inoperative

417-01-25 Exterior Lighting 417-01-25
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
4 Check if the left-hand high beam headlamp is
on continuously.
• Is the left-hand high beam headlamp on
continuously?
 Yes
GO TO F12
 No
REPAIR the short to power, circuit(s) con-
nected with the relay – high beam, connec-
tor C5, pin 3, by using the wiring diagrams.
TEST the system for normal operation.
F12: CHECK THE INSTRUMENT CLUSTER
1. 2.
Instrument cluster
C37a
3.
4 Check if the left-hand high beam headlamp is
on continuously.
• Is the left-hand high beam headlamp on
continuously?
 Yes
REPAIR the short to power, circuit(s)
connected with fuse F21, by using the wiring
diagrams. TEST the system for normal
operation.
 No
CHECK the instrument cluster. If necessary
INSTALL a new one. TEST the system for
normal operation.
PINPOINT TEST G: THE FLASH-TO-PASS FEATURE IS INOPERATIVE
CONDITIONS DETAILS/RESULTS/ACTIONS
G1: CHECK THE HIGH BEAM HEADLAMPS FOR PROPER FUNCTION
1.
E9418 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL