Ford 2002 Bantam - Front Seat Cushion (40 104 0)

501-10-10 Seating 501-10-10
DISASSEMBLY AND ASSEMBLY
Front Seat Cushion (40 104 0)
General Equipment
Hog ring pliers
Disassembly
1. Remove the front seat cushion.
2. Detach the seat cover.
• Cut the 15 hog rings.
3. Remove the seat cover.
1. Roll the seat cover towards the centre of
the foam pad to access the pleating hog
rings.
2. Cut the six hog rings.
4. NOTE: Note the position of the anti-squeak
mat to aid assembly.
Remove the foam pad.
E6770 EN 07/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED
BACK TO CHAPTER INDEX