501-10-11 Seating 501-10-11
DISASSEMBLY AND ASSEMBLY (CONTINUED)
Assembly
1. To assemble, reverse the disassemble
procedure.
NOTE: The anti-squeak mat is available as a
one size service part, which should be cut to
match the mat it is replacing.
• Use hog ring pliers to close the hog
rings. Do not use any other tool. The hog
rings must be closed to overlap 8 mm as
illustrated.
E6770 EN 07/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
BACK TO CHAPTER INDEX
To Next Page
Loading...
