Ford 2002 Bantam - Fuel Charging Wiring Harness (36 437 0)

303-04B-185 Fuel Charging and Controls — 1.6L / 1.3L Engine 303-04B-185
REMOVAL AND INSTALLATION
E6663 EN 07/2001 2002 Bantam
Fuel Charging Wiring Harness (36 437 0)
Removal
1. Detach the fuel charging wiring harness
and disconnect the electrical connector.
2. Disconnect the camshaft position (CMP)
sensor electrical connector and detach the
fuel charging wiring harness.
• Remove the cable tie.
3. Detach the fuel charging wiring harness.
• Remove the cable ties.
4. Disconnect the fuel injector electrical
connectors.