303-04B-186 Fuel Charging and Controls — 1.6L / 1.3L Engine 303-04B-186
REMOVAL AND INSTALLATION (CONTINUED)
E6663 EN 07/2001 2002 Bantam
5. Disconnect the temperature and manifold
absolute pressure T-MAP) sensor electrical
connector.
6. Disconnect the idle air control (IAC) valve
electrical connector.
7. Disconnect the throttle position (TP) sensor
electrical connector.
8. Disconnect the engine coolant temperature
(ECT) sensor electrical connector and
remove the fuel charging wiring harness.
To Next Page
Loading...
