Ford 2002 Bantam - Throttle Position (TP) Sensor - Vehicles with 1.6 L; 1.3 L Engines (23 325 0)

303-14-242 Electronic Engine Controls 303-14-242
REMOVAL AND INSTALLATION
E6694 EN 07/2001 2002 Bantam
Throttle Position (TP) Sensor — Vehicles with 1.6L / 1.3L Engines (23 325 0)
Removal
1. Remove the throttle body. For additional
information, refer to Section 303-04B.
2. Remove the throttle position (TP) sensor.
3. Remove and discard the O-ring seal.
Installation
1. NOTE:
Install a new TP sensor O-ring seal.
To install, reverse the removal procedure.