EasyManua.ls Logo

Ford 2002 Bantam - Brake Lock up During Light Brake Pedal Force

Ford 2002 Bantam
1663 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
206-00-12 Brake System — General Information 206-00-12
DIAGNOSIS AND TESTING (CONTINUED)
E1092 EN 07/2001 2002 Bantam
CONDITIONS
DETAILS/RESULTS/ACTIONS
F4: BLEED THE BRAKE SYSTEM
1 Check for air in the brake system. Bleed the
brake system. REFER to Section 206-00.
• Is the condition still present?
 Yes
GO TO F5
 No
Vehicle OK.
F5: CHECK FRONT WHEEL HUB RETAINING NUT
1 Check the front wheel hub-retaining nut for
looseness. REFER to Section 204-01.
• Is the front wheel hub-retaining nut loose?
 Yes
INSTALL a new front wheel hub-retaining
nut. Do not reuse the front wheel hub-
retaining nut. TEST the system for normal
operation.
 No
CHECK the parking bake adjustment.
REFER to Section 206-05.
PINPOINT TEST G: BRAKE LOCK UP DURING LIGHT BRAKE PEDAL FORCE
CONDITIONS
DETAILS/RESULTS/ACTIONS
G1: ROAD TEST THE VEHICLE
1 Road test the vehicle and apply the brake
pedal lightly.
• Do the rear brakes lock up?
 Yes
GO TO G2
 No
Vehicle OK.
G2: TYRE INSPECTION
1 Check for excessive tyre wear or incorrect tyre
pressures.
• Are the tyres in good order?
 Yes
GO TO G3
 No
SUBSTITUTE known good tyres. INFLATE
to the correct pressure. TEST the system for
normal operation.

Table of Contents

Related product manuals