308-03-47 Manual Transaxle 308-03-47
DESCRIPTION AND OPERATION (CONTINUED)
E4460 EN 07/2001
Item
Description
1 Input shaft
2 Output shaft
3 Output pinion
4 3rd gear teeth
5 3rd/4th gear synchronizer clutch
6 3rd gearwheel
Fourth gear
Item
Description
1 Input shaft
2 Output shaft
3 Output pinion
4 3rd/4th gear synchronizer clutch
5 4th gear teeth
6 4th gearwheel
Fifth gear
Item
Description
1 Input shaft
2 Output shaft
3 Output pinion
4 5th gear teeth
5 5th gear synchronizer clutch
6 5th gearwheel
Reverse gear
Item
Description
1 Input shaft
2 Output shaft
3 Output pinion
4 Reverse gearwheel
5 Teeth - reverse gear
6 Reverse gear idler
The reverse gear idler is driven by the input shaft
and its purpose is to reverse the direction of
rotation of the output shaft when reverse gear is
engaged.
The reverse gear idler is carried on a needle
roller bearing on the idler shaft, and also on a
mounting.
The detent mechanism and the gear selector
finger are mounted on a sleeve in the selector
mechanism housing, and they use a spring-
loaded ball keep the chosen gear engaged until
another gear is selected.
The selector lock mechanism has three selector
positions.
To Next Page
Loading...
