Ford 2002 Bantam - Cooling Fan Motor (24 222 0)

303-03-164 Engine Cooling 303-03-164
REMOVAL AND INSTALLATION
E6657 EN 07/2001 2002 Bantam
Cooling Fan Motor (24 222 0)
Removal
1. Disconnect the battery ground cable. For
additional information, refer to Section 414-
01.
2. Remove the cooling fan shroud right-hand
retaining nut.
3. Remove the cooling fan shroud left-hand
retaining nut.
4. Remove the engine undershield. For
ad
ditional information, refer to Section 502-
00.
5. Disconnect and detach the cooling fan
motor resistor electrical connector.