EasyManua.ls Logo

Ford 2002 Bantam - Charging System

Ford 2002 Bantam
1663 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
414-00-2 Charging System — General Information 414-00-2
DESCRIPTION AND OPERATION
Charging System
Vehicles with 1.6L / 1.3L RoCam Engine shown, Vehicles with Diesel Engine similar
Item
Description
1 Accessory drive belt
2 Charge warning indicator
3 Battery
4 Generator
The generator is mounted solidly towards the
front of the engine cylinder block and is driven by
the crankshaft pulley at approximately twice
engine speed through a drive belt. For additional
information, refer to Section 303-05.
When the engine is started, the generator begins
to generate alternating current (AC), which is
converted to direct current (DC) internally. The
DC current is controlled by the voltage regulator
and then supplied to the battery. When the
engine is not running and the ignition is switched
on, the generator will illuminate the charge
E6740 EN 07/2001 2002 Bantam

Table of Contents

Related product manuals