303-01B-27 Engine — 1.6L / 1.3L RoCam 303-01B-27
DESCRIPTION AND OPERATION (CONTINUED)
E6630 EN 07/2001 2002 Bantam
• Five bearing single overhead camshaft
• Two valves per cylinder
• Roller finger cam followers
• Hydraulic lash adjusters
• Laminated (two layer) steel head gasket
• Structural aluminum oil pan
• Plastic intake manifold with integrated throttle
body including throttle position (TP) sensor,
idle air control (IAC) valve, manifold absolute
pressure sensor with integrated temperature
and manifold absolute pressure (T-MAP)
sensor and fuel rail with four injectors
• Four-into-one exhaust manifold
• Crankshaft driven oil pump
• Lightweight plastic coolant flow control
housing with integrated double acting
thermostat, coolant bypass and mounting
boss for the engine coolant temperature
(ECT) sensor
• Electronic engine control (Bosch) engine
management system
Serial Number and Engine Code Location
The engine serial number and the engine code
are both stamped on the rear face of the cylinder
block.
To Next Page
Loading...
