303-03-148 Engine Cooling 303-03-148
REMOVAL AND INSTALLATION
E6655 EN 07/2001 2002 Bantam
Water Pump — Vehicles with 1.6L / 1.3L Engine (24 404 0)
Removal
1. Drain the cooling system. For additional
information, refer to Cooling System
Draining, Filling and Bleeding in this
section.
2. Remove the splash shield.
3. Loosen the water pump pulley bolts.
4. Remove the accessory drive belt.
1. Rotate the tensioner clockwise.
2. Remove the accessory drive belt.
To Next Page
Loading...
