211-02-58 Power Steering 211-02-58
REMOVAL AND INSTALLATION
Power Steering Fluid Cooler (13 444 0)
Removal
1. Raise the vehicle.
2. Remove the lower radiator shield (five
screws).
3. Remove the lower engine compartment
shield (10 screws).
4. Disconnect the fluid cooler pipe and hose
connections.
1. Disconnect the right-hand side pipe
union and hose connection.
• Allow the fluid to drain into a suitable
container.
2. Disconnect the left-hand side pipe
unions.
E5857 EN 07/2001 2002 Bantam
To Next Page
Loading...
