206-02-4 Drum Brake 206-02-4
REMOVAL AND INSTALLATION
E6594 EN 07/2001 2002 Bantam
Brake Drum Replacement (12 275 0)
Removal
1. Remove the parking brake control cover
trim. For additional information,
refer to Section 206-02.
2. Lower the parking brake control lever and
loosen the adjustment nut.
3. Loosen the wheel nuts.
4. Raise and support the vehicle. For
additional information, refer to Section 100-02.
5. Remove the wheel.
6.
CAUTION: If the grease cap is
damaged during removal install a
new cap.
Remove the grease cap.
7. Loosen the drum-retaining nut.
To Next Page
Loading...
