412-04-7 Control Components 412-04-7
REMOVAL AND INSTALLATION
E1277 EN 07/2001 2002 Bantam
Blower Motor Switch (33 574 0)
Removal
1. Standard preparatory measures
• Ask for the radio keycode.
• Make a note of the preset radio stations.
• Place protective covers over the wings.
CAUTION: Disconnect the battery
ground lead.
2. Remove the radio. For additional
information,
refer to Section 415-01.
3. Remove the bezel.
1. Remove the bolts.
2. Unclip the clips.
• Pull the bezel forwards.
• Disconnect the plug.
4. Unclip the air distribution shaft.
5. Remove the fan motor operating switch.
To Next Page
Loading...
