Ford 2002 Bantam - Passive-Theft System (PATS) Transceiver (33 662 0)

419-01B-16 Anti-Theft — Passive 419-01B-16
REMOVAL AND INSTALLATION
E4862 EN 07/2001 2002 Bantam
Passive-Theft System (PATS) Transceiver (33 662 0)
Removal
1. Remove the steering column lower shroud.
2. Disconnect the passive anti-theft system
(PATS) transceiver electrical connector.
3. Remove the PATS transceiver.
1. Remove the PATS transceiver retaining
screw.
2. Remove the PATS transceiver.
Installation
1. To install, reverse the removal procedure.
BACK TO CHAPTER INDEX
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED