501-20B-59 Occupant Restraints — Passive — Supplemental Air 501-20B-59
Bag System
GENERAL PROCEDURES
Scrapped Vehicle Air Bag Disposal
Special Tool(s)
Test and Deployment Lead,
Air Bag/Pyrotechnic Safety
Belt
418-S055 (40-007A)
General Equipment
12 volt battery
All vehicles
WARNING: To minimize the possibility of
injury in the event of premature de-
ployment, always carry a live air bag
module with the bag and trim cover
pointed away from the body. Failure to
follow this instruction may result in per-
sonal injury.
WARNING: To minimize the possibility of
premature deployment, live air bag
modules must only be placed on work-
benches, which have been ground,
bonded. Failure to follow this instruc-
tion may result in personal injury.
1. Disconnect the battery ground cable. For
additional i
nformation, refer to Section 414-
01.
2. Remove the air bag module(s) to be
deployed. For additional information, refer
to the relevant procedure(s) in this section.
Single stage air bag modules
3. Connect the test lead to the air bag module
and the adapter (driver air bag module
shown).
08/2001 2002 Bantam
To Next Page
Loading...
