206-03-5 Front Disc Brake 206-03-5
REMOVAL AND INSTALLATION (CONTINUED)
E9414 EN 03/2001 2002 Bantam
4. Remove the brake pads.
Installation
CAUTION: When the brake caliper pis-
tons are retracted into the piston hous-
ing, brake fluid will be displaced into the
brake fluid reservoir.
1. Using the special tool, retract the brake
caliper pistons.
CAUTION: Make sure the disc faces are
clean and free from grease, dirt or rust
prior to assembly.
2. Install the brake pads.
To Next Page
Loading...
