Ford 2002 Bantam - Radiator (24 254 0)

303-03-155 Engine Cooling 303-03-155
REMOVAL AND INSTALLATION
E6656 EN 07/2001 2002 Bantam
Radiator (24 254 0)
Special Tool(s)
Remover/Installer, Hose
Clamp
303-397 (24-003)
Removal
All vehicles
1. Disconnect the battery ground cable. For
a
dditional information, refer to Section 414-
0
1.
Vehicles with air conditioning
2. Remove the radiator grille.
1. Detach the clips.
2. Remove the radiator grille.
3. Secure the air conditioning (A/C) condenser
to the hood latch panel.
All vehicles
4. Drain the cooling system. For additional
information, refer to Cooling System
Draining, Filling and Bleeding in this
section.
5. Lower the vehicle.