206-00-27 Brake System — General Information 206-00-27
SPECIFICATIONS
E9395 EN 07/2001 2002 Bantam
Lubricants, Fluids, Sealers and Adhesives
Item
Specification
High temperature grease SAM - 1C9111-A
Super DOT 4 brake fluid SAM - 6C9103-A
Front Disc Brake Specification
mm
Brake disc diameter 239.5
New brake disc nominal thickness 20
Worn brake disc discard thickness * 18
Maximum brake disc run out (installed) 0.1
Maximum brake disc thickness variation 0.025
Brake caliper piston diameter 54
Minimum brake pad thickness 1.5
*When the discard thickness has been reached install a new brake
disc.
Drum Brake Specification
mm
New brake drum nominal diameter 203
Worn brake drum discard diameter * 204
Brake shoe width 30
Wheel cylinder bore diameter 17.78
New primary brake shoe lining thickness 6
New secondary brake shoe lining thickness 3.1
Minimum brake shoe lining thickness 1.0
*When the discard diameter has been reached install a new brake
drum.
To Next Page
Loading...
