206-06-10 Hydraulic Brake Actuation 206-06-10
REMOVAL AND INSTALLATION
E9400 EN 03/2001 2002 Bantam
Brake Pedal Cross-Shaft (12 338 0)
Removal
1. Remove the brake booster. For additional
information, refer to Section 206-07.
2. Disconnect the accelerator cable from the
accelerator pedal.
3. Remove the accelerator pedal.
1. Remove the clip.
2. Remove the pedal.
4. Detach the brake pedal cross-shaft
actuating rod from the brake pedal.
• Remove the clip.
To Next Page
Loading...
