206-06-11 Hydraulic Brake Actuation 206-06-11
REMOVAL AND INSTALLATION (CONTINUED)
E9400 EN 03/2001 2002 Bantam
5. Detach the brake pedal cross-shaft
mounting bracket from the bulkhead.
6. Detach the brake pedal cross-shaft
mounting bracket from the bulkhead.
1. Pull the bracket from the bulkhead.
2. Move the brake pedal cross-shaft to the
left.
7. Disconnect the connecting link spring from
the brake booster support bracket.
8. Remove the brake pedal cross-shaft.
• Rotate the connecting link in a counter
clockwise direction.
To Next Page
Loading...
