303-05-196 Accessory Drive 303-05-196
REMOVAL AND INSTALLATION
E5903 EN 07/2001 2002 Bantam
Accessory Drive Belt Tensioner — Vehicles with 1.6L / 1.3L Engine
Removal
All vehicles
1. Remove the generator. For additional
information, refer to Section 414-02.
2. Lower the vehicle.
3. Remove the accessory drive belt tensioner
pulley.
Vehicles with power steering
4. Detach the power steering pump and
secure it to one side.
Vehicles without power steering
5. Remove the accessory drive belt upper
idler pulley.
To Next Page
Loading...
