Ford 2002 Bantam - A Single Mirror Does Not Function with Switch Logic

501-09-5 Rear View Mirrors 501-09-5
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
2 Measure the resistance between the exterior
mirror control switch C325 pin 3, circuit 9-AD1
(BN/RD) harness side, and the passenger
exterior mirror C311 pin 6, circuit 9-AD17
(BN/GN) harness side.
• Is the resistance less than 5 ohms?
 Yes
INSTALL a new exterior mirror. TEST the
system for normal operation.
 No
REPAIR circuit 9-AD17 (BN/GN). TEST the
system for normal operation.
PINPOINT TEST C: A SINGLE MIRROR DOES NOT FUNCTION WITH SWITCH LOGIC
CONDITIONS DETAILS/RESULTS/ACTIONS
C1: CHECK THE EXTERIOR MIRROR FUNCTIONS WITH SWITCH LOGIC
1 Operate the exterior mirror control switch.
• Does the exterior mirror function with switch
logic?
 Yes
VERIFY the customer concern.
 No
Driver exterior mirror up/down function
inoperative
GO TO C2
Driver exterior mirror left/right function
inoperative
GO TO C3
Passenger exterior mirror up/down function
inoperative
GO TO C4
Passenger exterior mirror left/right function
inoperative
GO TO C6
C2: CHECK THE DRIVER EXTERIOR MIRROR UP/DOWN CIRCUIT
1.
Exterior Mirror
Control Switch
C325
07/2001 2002 Bantam